Hello,
I bought the MS II and the Jim stim. I put the Jim stim together and soldered all the different grouping of pins. I read at the end that these are for jumpers. It doesn't come with any wires for jumpering these pins. Doesn't anyone have any recommendations on where to get these. I have seen some people online with where they just clip on. I am Also trying to find out which ones are supposed to be jumpered. I am trying to get a 4.3 TBI motor running in my samurai. I would love any help. Thanks.
Will
Jim Stim
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Jim Stim
It should have included three jumper wires; we sell extras in the Tools section of our site. They could be used to test the spark output and stepper IAC driver if you want.
