ford 4.6 v8 with auto trans
Posted: Tue Feb 24, 2015 2:49 pm
Hi I'm currently fitting a 1995 ford 2v 4.6 v8 into my 1961 Econoline van. I have the full loom from the donor car including ECU and EDIS. I have decided to fit a turbo and was looking into what MS would be the best for this. I cant find much information on the earlier mod engines I know the PI heads are better but I've had this motor kicking around so decided to use it. It has an auto trans witch by following the ecu layout I can see that 6 wires go back to it.
I am after some help on deciding what MS to use and what I have to do with my Trans. Its only in a van so its not going to be a race car but I wouldn't mind running it down the strip a couple of times! Any help would be greatly appreciate, I'm sorry if these are dumb questions, but I've built a few cars with carbs but this is my first efi. Many thanks Ryan
I am after some help on deciding what MS to use and what I have to do with my Trans. Its only in a van so its not going to be a race car but I wouldn't mind running it down the strip a couple of times! Any help would be greatly appreciate, I'm sorry if these are dumb questions, but I've built a few cars with carbs but this is my first efi. Many thanks Ryan