Page 1 of 1
Posted: Sun Mar 27, 2005 3:40 pm
by Loadedagain
just an fyi... i have a battery at 6.3v on my v2.2 right now and she's dead as a doornail... no led function anywhere.
everything works nicely with my 12v power supply.
Posted: Fri Feb 24, 2006 1:08 am
by snillet
My PCB2.2 MS1 dies at approximately 6.5 volts. It´s nearly useless on ONE 9V battery except for a very short period, so i have 2 battery connections on it now
With dies i mean that it goes all dark on the leds and that the connection to Megatune is lost. Meashured the last voltage at the battery when that happened to 6.4 volts with a multimeter.
Posted: Tue Aug 22, 2006 3:37 am
by Crazy2287
I's just compleated my MS v2.2 and was messing with the rpm and the like and then i got 3 beeps and the MS shut down. That normal?
Not doing it now though, i got it hooked up to a motocycle 12V batt. Now i got no RPM reading, i think its just the transistor on the stim though.