it wound up being a short in the awful wiring harness that the previous person to work on this vehicle had made.
Currently, we are trying to find a 6 volt short to ground in the injector harness. Man, what a pain.
I know to not set the MS2 to read a 36-1 wheel when using EDIS - I also know its a ...
Search found 2 matches
- Tue Nov 17, 2009 7:32 pm
- Forum: MS-II Ignition Setup, Tuning, and Troubleshooting
- Topic: EDIS-4 no tach signal.
- Replies: 3
- Views: 270
- Fri Nov 13, 2009 12:09 am
- Forum: MS-II Ignition Setup, Tuning, and Troubleshooting
- Topic: EDIS-4 no tach signal.
- Replies: 3
- Views: 270
EDIS-4 no tach signal.
Installing EDIS-4 on a Mazda b2200 with MX6 engine (2.2 12v Turbo). MS2 2.89 (not extra) on PCB 3.57.
EDIS-4 is wired through factory shielded wires, we read 1.5+ VAC on the VR sensor and we get spark while cranking. EDIS is working, PIP is 12 while not cranking, and changes around when cranking ...
EDIS-4 is wired through factory shielded wires, we read 1.5+ VAC on the VR sensor and we get spark while cranking. EDIS is working, PIP is 12 while not cranking, and changes around when cranking ...