GM temperature sensors

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
A20Accord

GM temperature sensors

Post by A20Accord »

would any temperature sensor i take off a GM car with with megasquirt? im going to the junkyard tomorrow to pull out a few of them, and i was wondering which cars have an open element IAT.
Top
BottleFed70
MegaSquirt Newbie
Posts: 31
Joined: Fri Jun 24, 2005 2:22 pm

Post by BottleFed70 »

Just about any GM sensor will work.

I had the most luck getting sensors for early 90's GM cars. Cavaliers, and Sunfires.

It's so quick and easy to pull out the sensors I'd just go from car to car until you find one you like.
1970 Ford Mustang
351W Single T70 Turbo 6 PSI
MSII, v3.0 PCB, v2.889 firmware, Megatune 2.25
Top
woh
MegaSquirt Newbie
Posts: 4
Joined: Sat Aug 27, 2005 1:19 am
Location: Colorado, USA
Contact:
Contact woh

Post by woh »

The open elements are sometimes black plastic found in the air cleaner box.
Top
Post Reply

Return to “Wiring and Sensors”