1996 Nissan OEM Tach Use

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
480sx
MegaSquirt Newbie
Posts: 2
Joined: Mon Apr 16, 2007 5:35 pm
Location: Va

1996 Nissan OEM Tach Use

Post by 480sx »

Hey, i was wondering how im sposed to get my stock tach to work with megasquirts 12volt pickup to my Tach imput wire. I tried every quarter watt resistor in a radio shack pack, but none seemed to work. Infact a few, when hooked up, actualy killed the tach imput to the car and shut it down. Anyone have any ideas on this?
hightuner
MegaSquirt Newbie
Posts: 4
Joined: Tue Jul 18, 2006 10:19 pm

Post by hightuner »

MS-II V3.0 2.862
NISSAN VQ35DE 2002 / Maxima 96 MT
EDIS6 - PLX-M300 WB
480sx
MegaSquirt Newbie
Posts: 2
Joined: Mon Apr 16, 2007 5:35 pm
Location: Va

Post by 480sx »

I have a 96 Ka24de-T. It would be really nice to get the tach working.. Any other ideas would be great.

Ill try the last link tommarow to see if i can get it working.

Thanks
Post Reply