Knock sensing interface for MS&S-E and Megasquirt-II

Boris740 · Post by **Boris740** » Sat Jul 02, 2005 8:58 am

KnocksenseMS contains a dual active filter, pulse integrator and logic circuitry necessary to directly interface with Megasquirt and Megasquirt&Spark Extra or any other EMS unit that has suitable inputs.

It takes place of circuit shown in: http://megasquirt.sourceforge.net/extra/knock.html but performs same function with better selectivity. Each unit is tuned to your cylinder bore for optimum background noise rejection.

For MSII refer to http://www.megamanual.com/ms2/knock.htm
If you are using KnocksenseMS ignore the ESC module as KnocksenseMS takes its place and connects directly to JS4. Wiring diagram is supplied.

See my website for more or contact me by email.

rb26dett · Post by **rb26dett** » Wed Oct 17, 2007 1:51 am

The link is missing from the sig, whats the story with this?

Post by **efahl** » Wed Oct 17, 2007 3:42 am

Don't know, Boris hasn't posted since last year...

Boris740 · Post by **Boris740** » Wed Oct 17, 2007 4:58 am

efahl wrote:Don't know, Boris hasn't posted since last year...

I am very much alive and still in KnocksenseMS business.

Post by **efahl** » Wed Oct 17, 2007 10:54 am

Hi Boris, glad to know you are still around...

Boris740 · Post by **Boris740** » Wed Oct 17, 2007 12:10 pm

efahl wrote:Hi Boris, glad to know you are still around...

Been busy with hardware

http://www.viatrack.ca/WheelDyno/Dyno170507.jpg