I need 200cc/min injector @ 58psi

MikeManer · Post by **MikeManer** » Sun Jan 06, 2008 7:53 am

Can anyone give me an OEM application that might use an injector as described above? Thank you for any help.
Mike

Krita · Post by **Krita** » Fri Feb 01, 2008 5:19 am

toyota corollas from 4A-FE engine late 80's early 90's had about 195cc's if the set i have here are right but yeah at 43psi
i thinkthe 2.0L bmw's had about 150cc/min @ 43psi

have a look at http://users.erols.com/srweiss/tableifc.htm

shouldn't have an issue finding part numbers here

enjoy

MikeManer · Post by **MikeManer** » Fri Feb 01, 2008 6:19 am

Thank you for the help.
Mike

abustiffy · Post by **abustiffy** » Thu Mar 20, 2008 9:13 pm

MANY v8 ford are a high impedance bosh 19#/hr. THe older ones are the yellow top. I couldnt tell you off hand for others.

MikeManer · Post by **MikeManer** » Sat Mar 22, 2008 5:25 am

Thank you for the reply. I did in fact choose 19# injectors from a Mustang. Thanks again.
Mike