Main Relay Wiring Question on a MS V3

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
spudmurphy
MegaSquirt Newbie
Posts: 4
Joined: Wed Mar 01, 2006 5:12 am
Location: Lancashire, UK

Main Relay Wiring Question on a MS V3

Post by spudmurphy »

Hi,

I’m getting towards finishing off my loom for a V3 megasquirt install but I have antoher question. I’ve added the main relay inline with the external wiring diagram in the manual and am unsure as to the best way to split the live from the relay 3 ways to go to the 2 injector banks and the live for the MS.

Would an inline splice like the one in the picture be OK, I was going to use one of these or a terminal block, which would be the preferred method?

Image

Thanks for your help,

Spud
All these new words are starting to make me feel a little bit sick.
Top
spudmurphy
MegaSquirt Newbie
Posts: 4
Joined: Wed Mar 01, 2006 5:12 am
Location: Lancashire, UK

Re: Main Relay Wiring Question on a MS V3

Post by spudmurphy »

please help :(

How have other people joined the wires at this point in the loom?

Thanks,

Spud
All these new words are starting to make me feel a little bit sick.
Top
alienbush
MegaSquirt Newbie
Posts: 7
Joined: Thu Mar 20, 2008 9:40 am
Location: Spokane Valley, WA

Re: Main Relay Wiring Question on a MS V3

Post by alienbush »

That's how I wired mine, and it works fine for me.
Top
Post Reply

Return to “Wiring and Sensors”