Hello,
I am new to MS and would like to install the MS on my engine running fuel and ignition, I would like to know if I can use the stock crank sensor for the timing and the coils???
Or should I upgrade to MSD coils.
Just want to know what is your set up and how difficult will be to install MS with this engine.
Regards
MS for Chevy Corsa 1.8 L engine
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
alexjax177
- MegaSquirt Newbie
- Posts: 1
- Joined: Mon Apr 13, 2009 5:20 pm
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MS for Chevy Corsa 1.8 L engine
How exactly is the stock crank sensor set up on this motor? I know a lot of European GM cars used a Bosch 60-2 crank trigger. Another common design is a 7 tooth trigger, and I've seen a few other setups.
