No rpm or o2 readings

The forum to discuss:
- V2.2, V3 assembly,
- V2.2, V3 troubleshooting, and
- Connection troubleshooting
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: No rpm or o2 readings

Post by Matt Cramer »

The O2 sampling is keyed to the RPM signal, so you'll need to get an RPM before that responds. What sort of Stim are you using?
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: No rpm or o2 readings

Post by Matt Cramer »

It sounds like you have the ignition input circuit built correctly.
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: No rpm or o2 readings

Post by Matt Cramer »

All Pro-Jections I have seen are low impedance. Easiest way to know for sure is to check them with an ohmmeter.
Top
Post Reply

Return to “MS-II and V2.2/V3 Main Board Assembly, Testing, and Troubleshooting”