Just starting out on the MegaSquirt journey and I apologize if this topic has been covered in-depth but I am looking to convert both my Westfield (Vauxhall 1.6 XE engine) and my Caterham (1.6 Ford crossflow engine) using Suzuki GSXR600 throttle bodies.
My question is, is there a source of adapters that simply bolt onto the existing DCOE/DHLA manifolds to allow a neat conversion without a plethora of clips and hoses?
DCOE manifold to GSXR600 TBs adapters
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
devastator
- Experienced Squirter
- Posts: 333
- Joined: Mon Feb 11, 2008 10:19 am
- Location: Kinda near Tucson Arizona
Re: DCOE manifold to GSXR600 TBs adapters
There are TB's that'll bolt up to the DCOE/DHLA manifolds, but, to my knhowledge, there are not commonly available dapters to the GSXR TB's.
Sandrail-ACVW 2276 cc, Turbo
MS-II W/spark burning E85
The sand must be punished.
MS-II W/spark burning E85
The sand must be punished.
Re: DCOE manifold to GSXR600 TBs adapters
Hi
I just had a manifold made to accommodate my GSXR TBs, company called Bogg Brothers, it cost about £200 and they turned it around in less than a week, they done a really nice job. Saves you splitting the TBs and extending them.
I just had a manifold made to accommodate my GSXR TBs, company called Bogg Brothers, it cost about £200 and they turned it around in less than a week, they done a really nice job. Saves you splitting the TBs and extending them.