As late-model EV6 injectors are starting to become more common in the used/Ebay market there will be more folks wanting to use them. The injector connectors are different, though, which typically required an $8-10 pigtail to be spliced in. For a V8 application this means $80-100 more, which to me was a turn-off.
I have recently found 2 cheaper alternatives, a cheaper pigtail and an adapter connector.
Pigtail, approx $4 each, useful if making your own harness:
http://www.summitracing.com/parts/PCO-5 ... refilter=1
Adapter connector set, approx $45 for set of 8, useful if you have an existing harness that you don’t want to modify:
http://www.summitracing.com/parts/FMS-M ... /?rtype=10
injector adapters, EV1 to EV6
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
injector adapters, EV1 to EV6
Needs to get the toes out of the water and just jump off the diving board!!!
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: injector adapters, EV1 to EV6
Fury fan,
Nice find, thanks for posting the links!
Lance.
Nice find, thanks for posting the links!
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw