MS - 1 Datsun 280ZX 6 cylinder
I have been successful starting the engine. Sometimes when I start the car it runs fine at around 1200 rpm. Smooth with no issues. More often that not I get a fluctuating RPM between 400 and 500 RPM. If I pull injector number one's lead the engine dies.
I have a feeling I am dealing with a noisey signal form somewhere, can this be the tach or the alternator?
Dalalog and tune are attached.
Running on one cylinder
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
panders_123
- MegaSquirt Newbie
- Posts: 9
- Joined: Wed Jan 11, 2012 4:21 pm
Re: Running on one cylinder
Ignore this post. I added the jumper across D8 and everything has lined out. Running great. Going to finish tuning with tuner studio tomorrow.