Turning X-Tau "ON" with Tuner Studio

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
drholl

Turning X-Tau "ON" with Tuner Studio

Post by drholl »

My car runs great with version 2.886. I have decided to try X-Tau. With TS there is no configurator, that I can find, to enable X-Tau. So in TS the X-Tau is greyed out, as the X-Tau was not used previously.
Engines are fine, but computers scare me to death.
How do I get X-Tau turned on in Tuner Studio?

Thanks guys
Holl
trakkies
Super Squirter
Posts: 1162
Joined: Tue Dec 30, 2008 3:06 am
Location: SW London, UK

Re: Turning X-Tau "ON" with Tuner Studio

Post by trakkies »

Is it enabled in Project, Properties?
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Post Reply