offline auto tune?

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
wired
MegaSquirt Newbie
Posts: 1
Joined: Mon Aug 13, 2012 8:48 am

offline auto tune?

Post by wired »

Does the latest B&G code allow for the controller to make VE adjustments without TS connected? I know you may not want the o2 sensor to be correcting the VE table all the time, but is it capable of logging data so that changes can be recommended if you connect to TS again? I'm looking at putting MS on an ATV and it's not the most convenient thing to have a laptop in a back pack to allow for TS to be connected while I drive.
Bernard Fife
Master Squirter
Posts: 475
Joined: Thu Oct 29, 2009 12:54 pm

Re: offline auto tune?

Post by Bernard Fife »

"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
Post Reply