How do you disable the gamma E as it relates to the IAT temps? it seems everytime it gets hot (IAT) the gamma e pulls fuel...up to 85% which causes a very very lean condition (afr 18:1). i have it currently setup to run with no O2 corrections so when the gamma e pulls out fuel it is un drivable. i simple do not want any IAT density corrections...heelp
Vic
Gamma E driving me crazy..
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Army of Six
- MegaSquirt Newbie
- Posts: 33
- Joined: Mon Jan 12, 2009 12:23 pm
-
Army of Six
- MegaSquirt Newbie
- Posts: 33
- Joined: Mon Jan 12, 2009 12:23 pm
Re: Gamma E driving me crazy..
sorry..i forgot to mention... MSII 3.0 mainboard running v2.889 im pretty sure. i have looked everywhere trying to figure out how to disable it to no avail.
-
Army of Six
- MegaSquirt Newbie
- Posts: 33
- Joined: Mon Jan 12, 2009 12:23 pm
Re: Gamma E driving me crazy..
also, my IAT based fuel correction table it zeroed out.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Gamma E driving me crazy..
It sounds like you need to adjust the IAT based fuel correction to add more fuel at high IATs.
-
Army of Six
- MegaSquirt Newbie
- Posts: 33
- Joined: Mon Jan 12, 2009 12:23 pm
Re: Gamma E driving me crazy..
thanks for responding Matt. thats basically what i have done..it just seems like a band aid fix though..but its working.
thanks
thanks
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Gamma E driving me crazy..
Why does it sound like a band aid fix? That is the right adjustment for correcting fuel based on IATs.
-
Army of Six
- MegaSquirt Newbie
- Posts: 33
- Joined: Mon Jan 12, 2009 12:23 pm
Re: Gamma E driving me crazy..
i dont know..i guess the idea of adding fuel here to fix a problem with fuel being taken out from there. but if that is what i need to do then its fixed ;)
thanks again Matt.
Vic
thanks again Matt.
Vic