thanks in advance
need to get it started base map queerys
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
paulstryker
- MegaSquirt Newbie
- Posts: 2
- Joined: Sun May 26, 2013 11:33 am
need to get it started base map queerys
hi im new on here ans have a small problem. i have built from scratch a se7en type kit car with 2.0 zetec blacktop on busa bodies. i have installed a microsquirt management with edis ignition. now im confused what to do now. how do i get a base map onto the ecu and where do i get one from. this part really isnt my strong point so please be gentle and basic
thanks in advance
thanks in advance
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: need to get it started base map queerys
paul,
You might want to start by reading this: http://www.megamanual.com/begintuning.htm, then following the links in it as well as here: http://www.useasydocs.com/details/us3conf.htm and here: http://www.useasydocs.com/details/us3tune.htm
Lance.
You might want to start by reading this: http://www.megamanual.com/begintuning.htm, then following the links in it as well as here: http://www.useasydocs.com/details/us3conf.htm and here: http://www.useasydocs.com/details/us3tune.htm
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
-
paulstryker
- MegaSquirt Newbie
- Posts: 2
- Joined: Sun May 26, 2013 11:33 am