Changing x axis

For discussing Phil Tobin's TunerStudio MS is the MegaSquirt edition of TunerStudio, a next generation tuning application. It provides the ability to configure and tune all MegaSquirt controllers and is 100% compatible with MegaTune ini files and msq's.

Moderator: LT401Vette

Forum rules
Post Reply
Vitesse203
MegaSquirt Newbie
Posts: 6
Joined: Thu Oct 25, 2012 10:19 am

Changing x axis

Post by Vitesse203 »

Hi tunerstudio shows my x axis on VE table to be TPS adc and I would like to change it to Map and I can't remember how to change it.

Regards Paul
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Changing x axis

Post by Matt Cramer »

Change the fuel load from speed density to alpha-N.
Top
Vitesse203
MegaSquirt Newbie
Posts: 6
Joined: Thu Oct 25, 2012 10:19 am

Re: Changing x axis

Post by Vitesse203 »

Hi Matt

I should have said its the Y axis and it shows TPS adc on both VE table and AFR table. Changing to Alpha N would use TPS not MAP and the control is configured for Speed density already. I want to change the Y axis back to MAP dot and seem unable to do it.

Regards

Paul
Top
Vitesse203
MegaSquirt Newbie
Posts: 6
Joined: Thu Oct 25, 2012 10:19 am

Re: Changing x axis

Post by Vitesse203 »

Project settings had Alpha N selected in project properties. Sorted now thank you.

Paul
Top
Post Reply

Return to “TunerStudioMS”