When: The official 'MegaSquirt Meet' will be Saturday September 20th, 2014 -- We'll be hanging out in the area Friday the 19th thru Sunday the 21st. See the schedule below!
Where: DIYAutoTune HQ in Suwanee, GA, just NE of Atlanta.
DIYAutoTune.com
3690D Burnette Park Drive
Suwanee, GA 30024
What: The Annual MegaMeet is an opportunity to come and hang out with some of the major players that make the MegaSquirt project happen. Bowling and Grippo, the creators of MegaSquirt EFI will be here, as will Phil Tobin, writer of the TunerStudio and MegaLogViewer software. Typically, James Murray (all the way over from the UK) and Ken Culver, writers of the MS2/Extra and MS3 Firmware, come out and play as well! Several others who continue to make this project possible will be here to share the latest news on upcoming products and to talk tech. We've had people travel from all over the US, come down from Canada, and from as far as the UK to be here and that's sure to happen again this year.
Click here for more details: http://www.DIYAutoTune.com/events/megameet_2014.htm
2014 MegaSquirt meet at DIYAutoTune.com HQ - Sept. 20
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
