Bosch 2 Wire PWM IAC Valve test page in tuner studio?

This is the place to ask general MegaSquirt® questions if you are just getting started.
Please read the FAQ and MegaManual before posting. Also see the Forum Rules. Click this link for Purchasing information.
If you are looking for MS-extra or MS-3 information, please post here: www.msextra.com
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
shwagondawheels
MegaSquirt Newbie
Posts: 1
Joined: Sun Apr 18, 2010 8:49 am

Bosch 2 Wire PWM IAC Valve test page in tuner studio?

Post by shwagondawheels »

I've been looking for this test page in tuner studio to find what the open and closed (DC) percentages are?

How did he get this window?
https://www.youtube.com/watch?v=0axQ025NbiM

This is a MS1 ecu I am using

Any questions about my specs that may help answer my question just ask. Still learning here so work with me :RTFM:
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Bosch 2 Wire PWM IAC Valve test page in tuner studio?

Post by Matt Cramer »

This window is not available on MS1. He is using a MicroSquirt running MS2/Extra.
Top
Post Reply

Return to “General Information”