Help with wiring for fuel only

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
ks16v
MegaSquirt Newbie
Posts: 1
Joined: Tue May 24, 2016 7:26 am

Help with wiring for fuel only

Post by ks16v »

I have a VW Scirocco 16v turbo and I am trying to finish up the wiring. I am running v2.2 fuel only. I think I have most everything figured out except the ignition. I have seen conflicting diagrams for using the stock distributor and ignition control module. If anyone can help I would be so happy

crude wiring diagram : Image

pic of the board: Image
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Help with wiring for fuel only

Post by Matt Cramer »

Yes, Tach goes to the negative terminal of the coil.
Top
Post Reply

Return to “Wiring and Sensors”