I printed a mega manual back in 03.
Now back into playing with cars again after over a decade of absence the options available are overwhelming.
Which would be the cheapest assembled board to use on my 99 Corolla that I just installed a 01 vvt engine into.
i would like an ecu and long enough pig tails to wire all the sensors up myself.
Microsquirt work? Which version?
This engine has coil on plug that I could batch fire with wasted spark.
Thanks.
Which board for 01 1.8l toyota engine?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
prochargedmopar
- MegaSquirt Newbie
- Posts: 1
- Joined: Tue Dec 19, 2017 7:46 am
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Which board for 01 1.8l toyota engine?
If you want VVTi control, you'll need something in the MS3 family - that is supported separately at msextra.com.
A MicroSquirt can run the engine if not using VVTi though.
A MicroSquirt can run the engine if not using VVTi though.
Re: Which board for 01 1.8l toyota engine?
prochargedmopar wrote: Tue Dec 19, 2017 7:58 am I printed a mega manual back in 03.
Now back into playing with cars again after over a decade of absence the options available are overwhelming.
Which would be the cheapest assembled board to use on my 99 Corolla that I just installed a 01 vvt engine into.
i would like an ecu and long enough pig tails to wire all the sensors up myself.
Microsquirt work? Which version?
This engine has coil on plug that I could batch fire with wasted spark.
Thanks.
It may be simpler to find a good used OEM engine loom for your engine and modify to that to an MS connector. The DB37 as used on the full sized MS is a very cheap to buy connector as it is made by the millions for other uses too. You can get solder or crimp versions of the D series connectors. But do follow the MS external wiring diagram no matter which method you choose.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband