stalls when accelerates..
Posted: Wed Mar 04, 2009 8:59 am
Alright, so since my post got removed from here for using the ms2/extra, I went ahead and swapped it back to the ms 2.687 and am still having the same issues. As soon as I hit the gas, it tries to stall, if i SLOWLY push the gas in, it tries to rev to about 2k, then starts sputtering. I get lean spikes when I let off or as I do it. I have read the megamanual section, I did fool around whith the accell wizard, turning it way up, then way down, tried in between, all did the same thing. I did re-install firmware etc, etc.
So since now I have done all that, and Matt Cramer feals I need to ask a "real" question, what do I need to be looking into now, after trying all that?
MS2 3.57 board
89 TT Camaro, 350sbc TPI
32lb injectors
pre-built setup through DIY...
Thank you
So since now I have done all that, and Matt Cramer feals I need to ask a "real" question, what do I need to be looking into now, after trying all that?
MS2 3.57 board
89 TT Camaro, 350sbc TPI
32lb injectors
pre-built setup through DIY...
Thank you