Base Tune for Fox Mustang
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Base Tune for Fox Mustang
I noticed the base tune on DIYAutoTune, but it says it's for the MS2/Extra. Will this work with MS2 as well? If not, anyone have a good tune for me to reference? I'm running the FMS 30 lb injectors.
91 5.0 Mustang, TFI w/ MSD 6A, MS2 V3, LC-1, Custom twin Garrett T3s
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Base Tune for Fox Mustang
You could export the VE and spark tables and use them with B&G code, but if this car already has twin turbos, you probably will want to make a new tune from scratch anyway.
Re: Base Tune for Fox Mustang
I figured that, but was hoping the WUE was transferable and similar enough since I was hoping the turbos wouldn't have too much effect on the tune at idle.Matt Cramer wrote:You could export the VE and spark tables and use them with B&G code, but if this car already has twin turbos, you probably will want to make a new tune from scratch anyway.
Anyone have any timing table or VE table recommendations for a TT Mustang running low boost (5 - 10 psi)? Just wanted to have something to consider instead of just starting on the conservative side adjusting from the stock tables.
91 5.0 Mustang, TFI w/ MSD 6A, MS2 V3, LC-1, Custom twin Garrett T3s
Re: Base Tune for Fox Mustang
There's an EFI tunign section on Turbomustangs.com, and surely someone there can help you with MS stuff.
I realize this is the MS board, but there's such a variety of cars here. Turbomustangs is, well, exactly what it's called.
I realize this is the MS board, but there's such a variety of cars here. Turbomustangs is, well, exactly what it's called.
Needs to get the toes out of the water and just jump off the diving board!!!
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.