my question is... can i tap into the harness at another injector that is on the same cycle and jump over to #2 injector, or will that effect the injector im tapping onto (voltage/pulse width, ect)?
mustang PNP injector issue
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
boostdcoupe
- MegaSquirt Newbie
- Posts: 8
- Joined: Sat Sep 25, 2010 11:55 am
mustang PNP injector issue
ive got the packaged PNP squirt for my 347 vortech'd fox mustang, and im having a small issue. ive had the car tuned and it runs great, except it has a small studder thruout the RPM range, as i was checking the valve springs i noticed #2 cylinder spark plug was completely dry and looks like it just came out of the package (new), didnt even smell like fuel! at first i suspected a bad injector so i swaped locations of the injectors on #1 and #2 cylinders, the problem stayed on #2 cyl, so i figured the injectors were fine. then i plugged the plug in for #2 injector on #1 injector and vice versa... the problem moved to #1 cyl. checked the plug end wth a noid light and found it pulsating like it should...
my question is... can i tap into the harness at another injector that is on the same cycle and jump over to #2 injector, or will that effect the injector im tapping onto (voltage/pulse width, ect)?
my question is... can i tap into the harness at another injector that is on the same cycle and jump over to #2 injector, or will that effect the injector im tapping onto (voltage/pulse width, ect)?
'93ish coupe, CHP low comp. 347, TFS TH's, NX282HR, systemaxII, vortech SC trim, full manual 4R70W. best of 7.30@ 93 with the old AOD... shooting for the 6's this year!
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: mustang PNP injector issue
Splicing the harness like you describe shouldn't be a problem.
