I have car running on MS V2.2 and megasquirt.exe.
All attempts to use megatune on several Win 98 PCs with serial port have failed. (one without any other MS programs installed prior)
I have read and reread setup info. Port, com rate, ECU type, should be OK, but no communication with processor.
Megatune starts OK with display truncated in lower right screen that cannot be moved to see bottom row.
I would like to upgrade processor but not until I can communicate better.
Sorry if this is an obvious problem. I built MS V2.2 successfully in 2005 and have 20+ years with PCs.
Chandler
megatune problems XJS V12
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
megatune problems XJS V12
KC7EYZ
Re: megatune problems XJS V12
There's really no point in bothering with MegaTune as IIRC it's not supported any more. Get TunerStudio. I did have it (TS) running on a Win 98 SE laptop with serial port - but dunno if the current version will. I went to a more modern laptop as the one I had crashed when logging.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
XJS V12
I have my communications problems solved for now. Thanks for the help.
After considerable delay, I now have 1983 XJS V12 up and running and I have done one logging run.
I would like to share constants and VE tables with other V12 Megasquirt users of any version.
I am still using MS1 V2.2 .s19
After considerable delay, I now have 1983 XJS V12 up and running and I have done one logging run.
I would like to share constants and VE tables with other V12 Megasquirt users of any version.
I am still using MS1 V2.2 .s19
KC7EYZ
-
kjones6039
- Master Squirter
- Posts: 618
- Joined: Sat Jul 22, 2006 7:02 pm
- Location: Eureka, Nevada USA
- Contact:
Re: megatune problems XJS V12
What are we talking about here??????KC7EYZ wrote:megasquirt.exe
Agreeing with Dave, as usual! MegaTune is history and no longer supported. Download TunerStudio and do yourself a favor..... Get the paid version! You will never regret it!
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7