Hi All,
I am putting together a MS2 v3 as we speak. At this stage I have the board talking to the laptop but I have a long way to go. What I would like to know at this stage (so I can purchase them) is what sensors am I going to require. Detailed here is the setup I'm preparing for. The engine has individual throttle bodies, 4xLS1 coils (i read about a transistor mod I will require for this), fuel injected and will not be mating to any other OEM electronics.
I have read through the manual and just can't put my finger on what I am missing. Idle control valve is now non existent because of the ITB's, Manifold air pressure - well that's all gone too. What do other guys use with this setup.
Thanks for any help,
Mark.
What sensors will I need for first up install.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: What sensors will I need for first up install.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: What sensors will I need for first up install.
Mark,
If you're running ITBs and COP, you may want to investigate the MS/Extra code features.
If you're running ITBs and COP, you may want to investigate the MS/Extra code features.
