Hello folks, iv been looking for capacitors for my coil packs with not much luck the diagrams say something in the region of 25uf but all the ones I'm finding are 2.0 or 2.2 and I was wondering If it was as simple as losing the "." And the 2.2uf ones I got will do the job fine?
The other thing I was looking at was getting a bunch of these ferrite lumps that are so cheep to put on my injector wires? Will that achieve anything or are they only for filtering out really high fequencys ?
Cheers
Noise suppression
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Noise suppression
Another good option for a capacitor on the coil wire would be to use an old fashioned points condenser.
I've seen benefits from ferrites on USB wires but not much else.
I've seen benefits from ferrites on USB wires but not much else.
Re: Noise suppression
Ok cheers Matt, that'll keep me going for now