Hi I'm currently fitting a 1995 ford 2v 4.6 v8 into my 1961 Econoline van. I have the full loom from the donor car including ECU and EDIS. I have decided to fit a turbo and was looking into what MS would be the best for this. I cant find much information on the earlier mod engines I know the PI heads are better but I've had this motor kicking around so decided to use it. It has an auto trans witch by following the ecu layout I can see that 6 wires go back to it.
I am after some help on deciding what MS to use and what I have to do with my Trans. Its only in a van so its not going to be a race car but I wouldn't mind running it down the strip a couple of times! Any help would be greatly appreciate, I'm sorry if these are dumb questions, but I've built a few cars with carbs but this is my first efi. Many thanks Ryan
ford 4.6 v8 with auto trans
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Ryconoline
- MegaSquirt Newbie
- Posts: 1
- Joined: Tue Feb 24, 2015 1:14 pm
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
