Verification of programming
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
dwafford13
- MegaSquirt Newbie
- Posts: 1
- Joined: Wed Feb 10, 2016 6:12 pm
Verification of programming
I completed assembly and programming of my MSIII 3.0 over a year ago, then had to set my build aside. I'm just about ready to try a first engine start, but I've forgotten so much in that time that I'm very nervous about it. I would like to have someone with the necessary ability and experience review my program, and I'll happily pay for the service -- well worth the peace of mind -- I'm having nightmares of a huge puff of smoke made up of burning heaps of dollar bills! I've attached the final msq file.
You do not have the required permissions to view the files attached to this post.
-
kjones6039
- Master Squirter
- Posts: 618
- Joined: Sat Jul 22, 2006 7:02 pm
- Location: Eureka, Nevada USA
- Contact:
Re: Verification of programming
Your msq looks a bit strange to me....... What firmware version?
Ken
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
Re: Verification of programming
Looks to be ancient software. Is this an MSQ you were given as being suitable for your engine?
If it is an MS3, this forum doesn't cover it. You need MSExtra, linked from the top of this page.
If it is an MS3, this forum doesn't cover it. You need MSExtra, linked from the top of this page.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband