Bosch Coolant Temp sensor data

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
finkbuilt
MegaSquirt Newbie
Posts: 1
Joined: Thu Jun 01, 2006 2:36 pm
Location: Seattle
Contact:

Bosch Coolant Temp sensor data

Post by finkbuilt »

Does anybody happen to have the any temperature/resistance pairs for a bosch coolant temp sensor? or better yet the URL for the Bosch data sheet?

I want it to be close when I start up for the first time, and I also distrust my cheap meter.

thanks
renns
Helpful Squirter
Posts: 53
Joined: Fri Apr 02, 2004 5:12 pm
Location: Ontario, Canada

Post by renns »

Bosch sensor data is built in to EasyTherm. I can't say these are on the only Bosch thermistors out there, but many have used that data successfully. Here's a screenshot showing the T,R pairs.

Roger.
You do not have the required permissions to view the files attached to this post.
1979 Mazda RX-7, running MSnSExtra 08f-hires for fuel and spark control on a turbocharged, intercooled, and
(of course!) injected 13B rotary.
Post Reply