in this diagram, do i wire the heavy current through 85 -> 86, and then switch that connection on/off by putting low current between 30/87?
does it matter which side is hot?
thx.
this is a Rayex LD1A-12B.
How to read a relay diagram
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
How to read a relay diagram
not sure how to read this.... please answer if you know for certain...
in this diagram, do i wire the heavy current through 85 -> 86, and then switch that connection on/off by putting low current between 30/87?
does it matter which side is hot?
thx.
this is a Rayex LD1A-12B.
in this diagram, do i wire the heavy current through 85 -> 86, and then switch that connection on/off by putting low current between 30/87?
does it matter which side is hot?
thx.
this is a Rayex LD1A-12B.