I should've thought of this before I ordered, but a v3.57 board uses the same MS->Relay Board cable as a v2.2 or v3.0, right?
My old MS is a v2.2 but I think the relay board cable I've got is for a v3.0.
v3.57 boards can use the same relay board cable, right?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Minami Kotaro
- Helpful Squirter
- Posts: 48
- Joined: Sun Sep 12, 2004 3:41 pm
- Location: Somewhere in TN
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: v3.57 boards can use the same relay board cable, right?
Yes, all the main board versions can use identical relay cables. Our current relay cable has all the lower pins and six ground wires. There may be a couple other relay cable designs out there, but they'll all work.
-
Minami Kotaro
- Helpful Squirter
- Posts: 48
- Joined: Sun Sep 12, 2004 3:41 pm
- Location: Somewhere in TN