2cyl Ignition Only

This is the place to ask general MegaSquirt® questions if you are just getting started.
Please read the FAQ and MegaManual before posting. Also see the Forum Rules. Click this link for Purchasing information.
If you are looking for MS-extra or MS-3 information, please post here: www.msextra.com
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
3baby
MegaSquirt Newbie
Posts: 1
Joined: Sat Sep 04, 2010 3:58 am

2cyl Ignition Only

Post by 3baby »

Hey Guys,

looking at eventually running efi on my jetski engine.. but just wandering.. as the MSII can do a single coil trigger.. is there a MS package that does multiple coils? .. or does this not exist?

also.. as the engine im looking at putting this on is 2cyl.. im assuming i would have to setup using a wasted spark on the MSII?

thanks :-)
Top
Bernard Fife
Master Squirter
Posts: 475
Joined: Thu Oct 29, 2009 12:54 pm

Re: 2cyl Ignition Only

Post by Bernard Fife »

3bby,

Did you see this: http://www.microsquirt.info/dualspark.htm ? Dual spark (on MicroSquirt or a lightly modified MS-II) allows up to two ignition inputs and two outputs, so it can do non-wasted spark with a 2-cylinder.

Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
Top
Post Reply

Return to “General Information”