hey guys im nick i just ordered my new ms system with everything i need u hope. lol well here is what i have to start. MS230-K
$247 Megasquirt-II kit with V3.0 PCB
MK-Pullup $2 Pullup resistors mod-kit
MK-PWMIAC $7.50 PWM idle air control mod kit
MK-Boost $7.50 Electronic boost control mod kit
EBC_Sol_kit $39 EBC Electronic Boost Control Solenoid Kit
MSStim22-K $45 Stimulator kit
StimPower $7.99 Power supply for Stim or DIYPNP
MSHarness $65 12' wiring harness
IATwPiggy $22.25 Intake Air Temperature Sensor
38NPT-Bung_A $9 Aluminum bung for IAT sensor (Also available in stainless steel)
TuneCable $5.50 6' DB9 tuning cable
USB-2920 $22.50 (Only needed if your laptop doesn’t have a true DB9 port)
anything missing?what i am putting it in is a 1993 turbo ford 2.3 ranger with stock crank trigger. now i dont know how or what kinds trigger it is. would i have to go to edis?? its a 8 plug 4 cylinder. also are all the boards made up the same except the trigger? what do i need to do. what do i need to read. any help is great help,i also want anti lag 2 step and boost controler.
thanks
nick seezack
new to ms need help. i have an odd set up.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: new to ms need help. i have an odd set up.
The dual plug DIS behaves like a TFI instead of EDIS, so the usual TFI mods should work. Nothing really jumps out at me as missing on this list.
Re: new to ms need help. i have an odd set up.
thanks alot so i will build it for a tfi. should be in thursday. so stoked. my truck has been in the works for 2 years, it better be done in the next three months.lol
-
dangeranger93
- MegaSquirt Newbie
- Posts: 2
- Joined: Wed Jan 26, 2011 9:52 am
Re: new to ms need help. i have an odd set up.
msranger are you a member at www.turborangerforums.com ?
Re: new to ms need help. i have an odd set up.
yes i am. this is the link http://turborangerforums.com/showthread ... #post34467
-
dangeranger93
- MegaSquirt Newbie
- Posts: 2
- Joined: Wed Jan 26, 2011 9:52 am
Re: new to ms need help. i have an odd set up.
cool ill be keeping up with your thread, keep us posted over there. im thinking about the exact same thing when i get some more money so ill be following close, and i know there has been alot of talk over there lately about mega squirt so a guy actually doin it should bring alot of helpfull information
Re: new to ms need help. i have an odd set up.
will do i guess follow my thread..