Cars nowadays are using electric systems to control the Butterfly Valve (based on the TPS read) instead of the traditional mechanic control. These system is called drive by wire ( http://en.wikipedia.org/wiki/Drive_by_wire ).
I wanna known if the ms2 code already supports it.
Thank You!!!
ps: http://en.wikipedia.org/wiki/Electronic ... le_control
Butterfly Valve Control
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Butterfly Valve Control
MS2 can be used with a stock ECU or other device controlling the drive by wire, but will not run the drive by wire control itself.fcasanova wrote:Cars nowadays are using electric systems to control the Butterfly Valve (based on the TPS read) instead of the traditional mechanic control. These system is called drive by wire ( http://en.wikipedia.org/wiki/Drive_by_wire ).
I wanna known if the ms2 code already supports it.
Thank You!!!
ps: http://en.wikipedia.org/wiki/Electronic ... le_control
Lance is working on a way to get the GPIO board to handle drive by wire control, although I'm not sure on the status of that.
Re: Butterfly Valve Control
Again, thanks a lot!