105mm throttlebody mustang sensors on gm engine
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
105mm throttlebody mustang sensors on gm engine
I have a 76 nova that im gonna run fuel injection on.Well im gonna run the 4150style throttle body for the mustang because they dont sell one for gm ,that is a single plate throttle body and both the gm and mustang use the same flange on the intake manifold.I have never ran a engine management before, just fuel controllers and flash devices so im new to this can I run the ford sensors on the tb and run the rest of the sensors gm on the motor I plan to use ms3 but am in the process of buying most of the mechanical parts at the moment.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: 105mm throttlebody mustang sensors on gm engine
That's no big deal - you'll want to do a TPS calibration anyway before you start the car. Mixing and matching sensors is pretty easy with MS3.
Re: 105mm throttlebody mustang sensors on gm engine
Thanks for the help