Bosch 25 Pin Porsche 928 LH/Ezf connectors
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
tampa 928s
- MegaSquirt Newbie
- Posts: 2
- Joined: Mon May 23, 2011 3:43 am
Bosch 25 Pin Porsche 928 LH/Ezf connectors
I am looking for a source that has an Bosch 25 Pin Porsche 928 LH/Ezf connector. I want to build a interface to allow for Mega-Squirt-3 to be installed without cutting into the wiring harness. This would allow me to return to stock except for the Temp sensor to drive the car until the M/Q is dialed in. I need to be able to connect to the harness female 25-Pin and to the LH and Ezf with some type of interface. I cannot find anything on the net, any help would be appreciated.
Re: Bosch 25 Pin Porsche 928 LH/Ezf connectors
Look for a secondhand ECU (perhaps faulty) and get the connector from that?
I dunno your particular one, but sourcing this sort of spare can be near impossible. Even if you know the maker (Tyco, etc) and even the part number, that maker might be under contract to only supply Bosch or whatever. I found this with a wiper motor plug for a BMW - Tyco part number on it - but NLA from BMW.
I dunno your particular one, but sourcing this sort of spare can be near impossible. Even if you know the maker (Tyco, etc) and even the part number, that maker might be under contract to only supply Bosch or whatever. I found this with a wiper motor plug for a BMW - Tyco part number on it - but NLA from BMW.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
-
tampa 928s
- MegaSquirt Newbie
- Posts: 2
- Joined: Mon May 23, 2011 3:43 am
Re: Bosch 25 Pin Porsche 928 LH/Ezf connectors
I found a 25-Pin Diagnostic connector interface I have two extra ones to sell if anyone is interested.
It has two long cables with a box labeled with 25-pins to connect and test. Works and looks like a shop tool top quality must have been made for the Bosch 25-Pin Ecm.
It has two long cables with a box labeled with 25-pins to connect and test. Works and looks like a shop tool top quality must have been made for the Bosch 25-Pin Ecm.