New to MS
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
New to MS
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: New to MS
MegaSquirt EFI is not for sale or use on pollution controlled vehicles. So there is no CEL function.
Lance.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: New to MS
If you want one preassembled, you'd need one set up with the hardware needed for your car, unless you wish to modify it yourself. You could use the Check Engine light as a shift light or whatnot - it just won't retain its original function of indicating problems with emissions controls.sgianmx5 wrote:Hi there, i have a couple questions about MS systems, i have a 2000 miata and im just trying to figure out what all is needed to get a ms2 system up and running on my car, If i buy the preassemble kit do i just install it and than start driving, does the MS 2 system allow me to control my cel and what not? Ive already spent 2 hours reading and trying to find these answers im lost and confused any help would be greatly appreciated!
