Loading project

This is the place to ask general MegaSquirt® questions if you are just getting started.
Please read the FAQ and MegaManual before posting. Also see the Forum Rules. Click this link for Purchasing information.
If you are looking for MS-extra or MS-3 information, please post here: www.msextra.com
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
c20net
MegaSquirt Newbie
Posts: 1
Joined: Wed Jun 12, 2013 10:18 am

Loading project

Post by c20net »

Hi mates.A friend send me a project for megatune but i can't open it to see the settings/maps(Megatune Configuration File)
the error is
Although the file is read successfully,there are 683 warnings
writen to the audit.log file.You may want to review that first
before you send & burn the data
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Loading project

Post by Matt Cramer »

It sounds like MegaTune is set up for a different MS version. I'd use TunerStudio instead. It's a lot easier to use and will handle this seamlessly.
Top
Post Reply

Return to “General Information”