Mopar TBI
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
ConquestTurbo7
- MegaSquirt Newbie
- Posts: 1
- Joined: Thu Jul 11, 2013 9:13 am
Mopar TBI
I'm looking at putting MS2 in my 89 Dodge Ram w100 with a 318TBI 4 speed(NP435). I'm just wondering if anyone else has done it or tried it before? And it wouldn't have to be a ram too, maybe someone tried hooking up any moper TBI. I'm also looking at use MS2 in my Chrysler Conquest later down that road too, if anyone has try that car too.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Mopar TBI
It's just a distributor with a Hall effect sensor and an 8 tooth wheel. Pretty much your basic distributor setup. Set the MS2 up for direct coil control.
