Running the VCT on a 1.7 Ford Puma with Megasquirt
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
fiestaphilwxm
- MegaSquirt Newbie
- Posts: 1
- Joined: Mon Dec 07, 2009 6:19 pm
Running the VCT on a 1.7 Ford Puma with Megasquirt
Can megasquirt provide the progressive VCT that the 1.7 Ford Puma engine has as standerd. If not can it activate it at a certain rev (The same as vtec in honda engines). Any info would be great, Thanks.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Running the VCT on a 1.7 Ford Puma with Megasquirt
On/off VVT can be done with the spare outputs. Continuously variable VVT is not available just yet but will probably be implemented at some point in MS3.
