Would it be a good idea to take the 12v to the flyback damping board from outside MS, or is that only a V3.0 board noise issue.
I'm building up an old V2.2 I had around for a lo-z injector V8, and am at the output side construction.
Thanks!
V2.2 w/flyback board wiring question
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
flylear45
- MegaSquirt Newbie
- Posts: 6
- Joined: Wed May 12, 2004 3:20 am
- Location: http://home.roadrunner.com/~jimmble
- Contact:
V2.2 w/flyback board wiring question
Jim Franks
MS'd 2 Merkur's, custom flathead Ford motorcycle, a BMW with 2.3 turbo, TR7 2.3 turbo.
Latest mission: 5.0 VGT turbo 1988 TC with 4r70w. Yeah
Too many projects, too little time...
MS'd 2 Merkur's, custom flathead Ford motorcycle, a BMW with 2.3 turbo, TR7 2.3 turbo.
Latest mission: 5.0 VGT turbo 1988 TC with 4r70w. Yeah
Too many projects, too little time...
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: V2.2 w/flyback board wiring question
It is best if the flyback board gets a separate 12 volt source.
-
flylear45
- MegaSquirt Newbie
- Posts: 6
- Joined: Wed May 12, 2004 3:20 am
- Location: http://home.roadrunner.com/~jimmble
- Contact:
Re: V2.2 w/flyback board wiring question
Thanks Matt. I was leaning that way, now I'll do it.
Jim Franks
MS'd 2 Merkur's, custom flathead Ford motorcycle, a BMW with 2.3 turbo, TR7 2.3 turbo.
Latest mission: 5.0 VGT turbo 1988 TC with 4r70w. Yeah
Too many projects, too little time...
MS'd 2 Merkur's, custom flathead Ford motorcycle, a BMW with 2.3 turbo, TR7 2.3 turbo.
Latest mission: 5.0 VGT turbo 1988 TC with 4r70w. Yeah
Too many projects, too little time...