MSefi.com read only forum (Jan.15,2018)

will i was all ways a carb guy but i made the change to ms2 efi. right now i still am trying to get the car tune got it to idle right now and the guy that is helping me he wants me to send him the tune but i dont know how to send a tune so i need help on how do i send my tune to some one.
thanks

Matt Cramer wrote:Are you using a serial port or USB adapter?

i am using the cable that i got with the ms in to adapter that go's into the USB port

dose windows 8 have anything to do with should i go back to windows 7

i need some help right now i have a ms v3.75 i download tune studio and i am trying to get it off line it keeps saying disconnected i run the port check and i get one to come up and i pick it them try test port and them says failed.
i have a gateway(part number NV52L15u) with windows 8
any hints or ...

anyone
ttt

so off the disturber there is a orange/black and off the msd box its purple/green, on the mds the green is negative and the purple is postive.
when you plug them in to each other it go
(dis)orange-(msd)purple would be the wight wire off ms
(dis)purple-(msd)green would be the black wire off ms
so on ...

Matt Cramer wrote:There's a couple things missing from your answers.

1. What board and firmware are on the MS2?
2. What SENSOR is in the MSD distributor? The distributor cap would not have a sensor.

sorry the board is ms2 pcb v3.57
for the sensor i don't know but's its a locked out timing with a Magnetic Pickup

Even though I'm not familiar with your MSD distributor, maybe we can figure this out, but we'll need some additional information.

What version (processor, board, firmware etc.) MS are you connecting this to-------------------]running the ms2[/url]
What type of coil do you plan to control ...

anyone?

this wire in the wire harness with the wight ond black wire go's to a msd disturber wires
http://i1306.photobucket.com/albums/s577/turbojohnnyb/securedownload8_zps1912ed26.jpg
http://i1306.photobucket.com/albums/s577/turbojohnnyb/securedownloadh_zps093cc223.jpg

this is the msd disturder that i ...

was wondering on the wire harness there is 2 wires that are cuddled with a heralded with a black and wight wire that go's the the disturber and was wondering where do the black and wight wire go to on the disturber
dose the black on go to the black
and wight go to the orange wire.

was wondering the red power wire if i run it to a switch that has all time 12 amps do i have to run a in line fuse from the red power wire to the 12v switch.
for the injectors wiring dose it take a 5 amp fuse or should i go bigger.

how doses someone go about to wire up a relay board as a stand alone system.

i have a 82 mustang with a turbo sbc in it. its carb right now and i want to go efi.
right now in my car i have a painless wiring through the hole car with the performance swich panel 8 circuit. so i was wondering if i can still ues the painless set up and go efi or do i need to get all new wire ...