MSefi.com read only forum (Jan.15,2018)

thanks!!

maybe looks like a odd question but.. can we shield a few signals in the same multi wire shielded cable ? can signals interfer between eachothers? or noise shielded by the shielding is really from an intense noise source?

if it's okay i could run a few signals in the same wire ligthening my harness

here's a pic of the near finished crank wheel sensor

still have to paint the bracket and align the good thoot with the VR sensor at TDC then tack the wheel to the pulley

but bracket is made :) holes are slotted for adjusting

http://www.glaciuz.com/~people/INSTALLATION%20MS/VR%20sensor2.JPG ...

on my setup i used a Diesel alternator bracket so my pulley pattern is a bit weird so i only have one v-belt on my cranki pulley

i got another crank pulley to the mahcienshop and 30$ later

machined on a lathe so my Ford Escort thooted gear is centered and sitting on a flat surface now gotta make a ...

hello


im at the beginning of my MS installation
i got my engine running with a stock injection

here i am

VW 2l 16v turbo engine going to the EDIS system

im preparing my trigger wheel and i want to know something...

if i weld the gear with 4-5 tacks in the center do the welds can interfer with ...