Like the title says.
I am looking for a 1, or 2 barrel throttle body injection unit that will bolt up to the intake of a 6 cylinder Ford motor( late 60's Mustang).
Any ideas where to look? Doesn't have to be 100% bolt on, I can fab up an adapter if necessary.
Rusty
Looking for a 1 barrel carb style TBI
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Looking for a 1 barrel carb style TBI
How much flow do you need? I'd probably adapt something like a GM V6 TBI.
Re: Looking for a 1 barrel carb style TBI
As mentioned, I'd look at a GM unit, one off a 4.3 might be your best bet. For a 1-barrel look at the GM 4-cyl cars of the mid-80s.
If you have a Motorcraft pattern on that intake, there is an adapter available to fit on the GM 2-V TBI units (fits the 4.3-5.0-5.7 ones).
If you have a Motorcraft pattern on that intake, there is an adapter available to fit on the GM 2-V TBI units (fits the 4.3-5.0-5.7 ones).
Needs to get the toes out of the water and just jump off the diving board!!!
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.
Re: Looking for a 1 barrel carb style TBI
Hmm 4cyl in the mid-80's I'll look into that.fury fan wrote:As mentioned, I'd look at a GM unit, one off a 4.3 might be your best bet. For a 1-barrel look at the GM 4-cyl cars of the mid-80s.
If you have a Motorcraft pattern on that intake, there is an adapter available to fit on the GM 2-V TBI units (fits the 4.3-5.0-5.7 ones).
-
DaytonaTurbo
- MegaSquirt Newbie
- Posts: 9
- Joined: Fri Jun 17, 2005 2:07 pm
Re: Looking for a 1 barrel carb style TBI
Also the chrysler 4cyl cars out of the 80's have readily available one-bbl tbi's on them.
440 powered Plymouth Satellite
Re: Looking for a 1 barrel carb style TBI
Whattare you doin' here? I thought we were waxing philosophical over on Moparts??? 
Needs to get the toes out of the water and just jump off the diving board!!!
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.
current EFI project:
65 Chrysler 300L, 413, working on inline dual GM TBI units, will run with MS2. Hoping to have factory-style appearance.