Hi everyone,
I just started my first megasquirt project, so far I have assembled the ms-1 i got from DIYAutoTune.com. i am going to install it on a 13hp Honda air-cooled engine.
for inputs i am going to use:
coolant temp- gm coolant temp sensor atached to fins on the side of the cylinder
intake temp- gm intake temp sensor in intake tract
rpm-inductive pickup on sparkplug wire
map-megasquirt map sensor
o2- gm 3 wire o2 sensor
what do you guys think? this is my first project like this, thats why im installing it on a small engine. once i am happy with the results i will install a ls 5.3 in my truck and run it off of a ms-3
new guy with first project
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
georgebrookins
- MegaSquirt Newbie
- Posts: 1
- Joined: Fri Dec 12, 2014 5:47 pm
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: new guy with first project
Welcome! Keep us posted on how this one goes.
